Disinfectant (powder) Halamid, 2 kg

Usage:

Spray or rinse surfaces and equipment with a 0.5% Halamid solution, using 0.3 l/m², and allow to act for at least 30 minutes (contact time). For sticky diseases, use a 1% solution.

For nebulization using a sprayer, use a 2–3% solution at a consumption of 40–50 ml/m³. For vehicle disinfection, use a 1% solution. For footbaths, use a 2% Halamid solution. For teat cup disinfection after each milking, use a 0.3% solution.

Aquaculture – tanks and ponds:
For spraying or wiping, it is recommended to use a 1% Halamid solution. In case of heavy contamination, use a 2% solution, minimum 0.3 l/m². Allow to air dry.

Equipment (including nets):
Spray, rinse, or soak in 0.5–1% Halamid solution for 30 minutes. Spray vehicles and boats at 1% concentration. Use a 2% solution for disinfection mats, renewing as needed.

External microorganism control:
Add Halamid to water at a concentration of 10–20 ppm (10–20 g/1000 l), first dissolving the required amount in a sufficient volume of water, then adding to the pond or tank. After 1 hour of contact time, rinse the tank or pond with fresh water. In case of severe infections, use no more than 3 times per week. For standing water, use 3–5 ppm once a week.

Storage:

Store in a dry, cool, and well-ventilated place in the original, tightly sealed packaging. Protect from moisture, direct sunlight, and heat sources.